Hydraulic Motor 250CC HGM-15E-3138 for Parker TF Series, 17.5KW 700N·m Wheel Motor, 20.5MPa 290RPM for Construction Industrial Machinery

DescriptionIn the exploratory world of mechanical kinetic energy, this exceptional hydraulic motor of ours can demonstrate exceptional control precision and powerful driving force. Built with high-strength materials and rigorously tested, it ensures stable operation and long service life even under severe working conditions. Whether it is high temperature, high pressure, or continuous operation, it can easily cope with it and is your reliable long-term partner.Key Features【Sturdy and Durable】: The product is made of high-quality cast iron, using spray painting technology, with high strength, wear resistance, and long service life.【Strong Power】: With a power of 17.5KW, a maximum speed of 290RPM, and a maximum torque of 700N·m, this product can provide continuous and powerful power to enhance work efficiency.【Good Sealing】: The use of triple seals to prevent oil leakage ensures excellent sealing and a smooth process of use.【Excellent Performance】: Adoption of S-type triple bearings, and low carbon alloy steel output shafts treated with carbon and nitrogen co-infiltration and hydrogenation ensures the product's strong radial force and resistance to high pressure, and longer service life. Precision-machined fixed rotor pair can make the plane error less than 2μm, making the work more stable.【Ready to Use】: The one-piece structure allows you to use the product directly without an additional assembly. All you need to do is connect the product's oil outlet and fix this product to the machine through flange holes.【Easy to Clean】: The smooth surface and angular structure design allow you to easily remove dust from the surface of the product with a towel.【Excellent Pressure Resistance】: It can withstand back pressures of up to 5MPa and a maximum pressure of 20.5Mpa and has good working capability even in harsh environments.【Customer Service】: We aim to provide high-quality products and services. If you have any questions, please feel free to contact us. We will reply as soon as possible and solve the problem for you.Details【4 Flange Holes】: They facilitate firmly mounting the product on the desired machine.【Oil Distribution Disc】: It adopts a metallurgy valve disc with high precision and wear resistance.【Round Corners】: They not only add to the aesthetics of the product but also improve the safety of use.ApplicationIt fits for the Parker TF Series. It applies to industrial, logistics, agricultural, refitting, engineering machinery, industrial machinery, construction machinery, shipbuilding and aviation, harvester equipment, excavator equipment, light machinery equipment, various types of automobiles, and more.SpecificationsProduct No: HGM-15E-3138Color: BlackStyle: ModernMaterial: Cast IronProcess: Spray PaintingAssembly Required: NoDisplacement: 250CCMax. Flow Rate: 70L/18.49 Gal/minMax. Speed: 290 RPMMax. Pressure: 20.5 MpaMax. Torque: 700 N·mMax. Power: 17.5 kWMax. Back Pressure: 5 MPaMaximum Operating Temperature: 80°C/ 176℉Shaft: 1-1/4'' Taper ShaftNumber of Flange Holes: 4Recommended Anti-wear Hydraulic Oil: No. 68Product Size: 12.7*22.93cm/5*9.03inGross Weight: 13.5kg/ 29.76 lbsPackage Size: 32*17*20 cm/ 12.60*6.69*7.87 inPackage Included1* Hydraulic MotorNotes1. Please note that this product is not to be used at maximum speed and maximum pressure at the same time.2. Please note that we recommend running the motor at 30% load for one hour before running it at full load.3. Please note that the motor should be kept full of hydraulic oil (not included) at all times before and during operation.4. Please note that the back pressure of the motor should not exceed 5 MPa and that an external drain line (not included) should be connected in case of exceeding 5 MPa.5. Please note that when ordering and replacing the hydraulic pump, always replace the wheel motor and pipework, flush the tank, and install a new oil filter, otherwise the hydraulic pump will fail due to contamination.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.

• 【Sturdy and Durable】: The product is made of high-quality cast iron, using spray painting technology, with high strength, wear resistance, and long service life.
• 【Strong Power】: With a power of 17.5KW, a maximum speed of 290RPM, and a maximum torque of 700N·m, this product can provide continuous and powerful power to enhance work efficiency.
• 【Good Sealing】: The use of triple seals to prevent oil leakage ensures excellent sealing and a smooth process of use.
• 【Excellent Performance】: Adoption of S-type triple bearings, and low carbon alloy steel output shafts treated with carbon and nitrogen co-infiltration and hydrogenation ensures the product's strong radial force and resistance to high pressure, and longer service life. Precision-machined fixed rotor pair can make the plane error less than 2μm, making the work more stable.
• 【Ready to Use】: The one-piece structure allows you to use the product directly without an additional assembly. All you need to do is connect the product's oil outlet and fix this product to the machine through flange holes.
• 【Easy to Clean】: The smooth surface and angular structure design allow you to easily remove dust from the surface of the product with a towel.
• 【Excellent Pressure Resistance】: It can withstand back pressures of up to 5MPa and a maximum pressure of 20.5Mpa and has good working capability even in harsh environments.
• 【Customer Service】: We aim to provide high-quality products and services. If you have any questions, please feel free to contact us. We will reply as soon as possible and solve the problem for you.